New Attachments

Attachments tailor Cat machines to the specific requirements of a customer's working needs. Caterpillar Attachments enhance the productivity and utility of Caterpillar machines, equipping them for a wide range of tasks and operating requirements, and providing total system solutions for any job application.


To see all of our new attachments currently for sale, click on the images below:

Mobile Scrap & Demolition Shears S3035 Rotating Scrap & Demolition Shear

Steel-frame demolition and scrap processing are the starting points for metals recycling. Cat® Scrap and Demolition Shears power through these applications, providing the production and reliably that keep your operation in the black. Available in sizes to fit Cat machines from skid-steers to large excavators.

Mobile Scrap & Demolition Shears S3035 Rotating Scrap & Demolition Shear

Steel-frame demolition and scrap processing are the starting points for metals recycling. Cat® Scrap and Demolition Shears power through these applications, providing the production and reliably that keep your operation in the black. Available in sizes to fit Cat machines from skid-steers to large excavators.
Units: USMetric
Weight - Boom Mount 7553 lb 3426 kg
Weight - Stick Mount 7057 lb 3201 kg
Length 137 in 3489 mm
Height 49.6 in 1260 mm
Width 29.5 in 750 mm
Jaw Width - Fixed 17.5 in 444 mm
Jaw Width - Moving 4.8 in 122 mm
Jaw Opening 22 in 560 mm
Jaw Depth 21.3 in 540 mm
Throat Force 653 ton-f 5809 kN
Apex Force 282 ton-f 2509 kN
Tip Force 149 ton-f 1328 kN
Cutting Circuit - Maximum Relief Pressure 5075 psi 35000 kPa
Cutting Circuit - Maximum Flow 66 gal/min 250 l/min
Rotation Circuit - Maximum Relief Pressure 2030 psi 14000 kPa
Rotation Circuit - Maximum Flow 11 gal/min 40 l/min
Stick Mounted - Maximum 36 tons
Stick Mounted - Minimum 24 tons
Boom Mounted - Maximum 20 tons
Boom Mounted - Minimum 16 tons
Cycle Time - Close 3.1 Seconds
Cut More, Cut Faster
  • More productive by design. Shears are designed as a system solution to cut more tons per day and make you more money by balancing machine capabilities, shear cylinder size, jaw depth and opening, and leveler arm length.
  • Increase cut efficiency by up to 15 percent and reduce blade wear with the dual offset apex jaw design.
  • Accurately place the jaws in optimum cutting position without moving the machine with the standard 360° rotator on the S3000 Series.
  • Power is consistent through the entire cutting cycle.
  • The shears are optimized for Cat excavators to ensure proper matching, optimal cycle times, and range of motion.
  • Increase cutting efficiency with tapered spacer plates which reduce jamming and drag.
  • The cylinder rod is completely protected inside the frame reducing downtime and the risk of damage and allowing for a slimmer design for better visibility.
  • The jaw relief area allows material to fall away freely without hindering the next cutting cycle.
Long-Lasting Quality
  • Reduce maintenance costs with the new Bolt-on Piercing Tip. Dowels protect the bolts from stress that leads to loosening and a bushing equalizes force on both halves of the tip to help prevent splitting.
  • Work confidently with demanding hydraulic requirements. Major hydraulic components are built with a 4 to 1 safety factor and can withstand pressure spikes up to 20,000-psi (1378 bar).
  • Increase overall durability with the solid plate construction of the upper jaw.
  • The housing is designed with a 60 percent safety factor in yield strength and high-stress areas are built with extra thick plates.
  • The heel plate is constructed of AR400 high-wear resistant material to provide long life between weld build up and replacement.
  • Endure high forces with confidence with the oversized torque tube.
Easy to Maintain
  • Easily and safely complete maintenance tasks. Shears can be greased at ground level along with the machine stick cylinder pin and boom pin.
  • Reduce downtime with field serviceable swivels. Removing and resealing can be done quickly and easily while the shear is mounted to the machine, without the need to take it to a shop.
  • Service and adjust the pivot group without the need for any special tools. The side play can be easily adjusted by simply tightening the pin.
  • Easily change the tip and flip the blade in thirty minutes with standard tools.
  • Access the cylinder’s hoses and speed valve easily from the side of the shear. This feature eliminates the need for a cover that can fall off and need repaired.
  • You are supported. The Cat Dealer Network is your one point of contact for all your service needs.
Options to Meet Your Needs
  • Connecting your shear to a variety of machines has never been easier. Dual high-pressure ports allow the shear to attach to any compatible machine regardless of the hydraulic layout.
  • Meet your specific needs with straight and rotating configurations and boom and stick mount options.
    • Straight – S2000 Series
      • Boom mounted
      • Used in secondary demolition and scrap applications
      • Rotator is eliminated, reducing maintenance costs
      • Larger shears can be used on smaller machine size classes
    • Rotating – S3000 Series
      • Boom or Stick mounted
      • Used in scrap, primary, and secondary demolition applications
      • Provides optimal cycle times and positioning
    • Boom Mounted – Ideal for scrap applications, boom mounted shears allow for easier handling and operation.
    • Stick Mounted – Ideal for demolition applications, stick mounted shears are compatible with larger machines and provide a greater reach.
Loading animation

Find out more

For more information or to request a quote, please complete the form below.

©2023 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies   Accessibility   Supplier Code of Conduct