Type (1)	Autonomous ready
Components (1)	Drill depth meter
Components (2)	Drill Assist Automated Functionality (onboard technology):<br>- Auto Level (with auto retract jacks)<br>- Auto Mast (raise, lower and lock into place)<br>- Auto Dril (single pass)
Components (3)	Cat Terrain ready
Components (4)	Product Link™ Elite

U.S. EPA Tier 2 Equivalent - Engine	C18 @ 1,800 rpm
U.S. EPA Tier 2 Equivalent - Emissions	U.S. EPA Tier 2 equivalent
U.S. EPA Tier 4 Final - Engine	C18 @ 1,800 rpm
U.S. EPA Tier 4 Final - Emissions	U.S. EPA Tier 4 Final
Compressor - Rotary Drilling	32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi)
Angle Drilling Available	30 degrees to 0 degrees in 5-degree increments
Bit Load (single-Pass)	37400 lb 16964 kg
Hoist Speed	4.3 ft/s 1.32 m/s
Hole Diameter Range	140-200 mm (5.5-7.87 in)
Hole Depth Range - Single-Pass Depth	36 ft 11 m
Compressor - DTH Drilling	29.7 m_/min (1,050 ft_/min) @ 24.1 bar (350 psi)
Pull-DownCapacity	Up to 15 876 kg (Up to 35,000 lb)
Hoist Capacity	Up to 11 907 kg (Up to 26,250 lb)
Hole Depth Range - Multi-Pass Depth	Down to 47.58 m (Down to 156 ft)
U.S. EPA Tier 4 Final - Power Rating (ISO 14396)	589 HP 439 kW
U.S. EPA Tier 2 Equivalent - Power Rating (ISO 14396)	587 HP 438 kW

Climate Level 1 Standard Fluids and Lubricants (1)	Rated down to -1C (30 F)
Climate Level 1 Standard Fluids and Lubricants (2)	Withstands high heat up to 52 C (125 F)
Climate Level 2 Arctic Fluids and Lubricants, Engine Block and Manifold Heater 120V or 240V	Rated down to -18 C (0 F)

DTH Drilling	Includes tool lubrication system
Rotary Drilling	Optional tool lubrication system
Note	With the compressor's electronic controls plus variable volume control, the operator can adjust air output to reach optimal match of tool, flushing air and ground conditions. Both high and low pressure compressors contain this feature.
DTH Drilling - 1050 cfm/350 psi	29.7 cmm (1,050 cfm) @ 24.1 bar (350 psi) with 113.5 L (30 gal) tool oiler
Rotary Drilling - 1150 cfm/125 psi	32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi)

Components (1)	Coolers with easy cleaning access
Components (2)	All cooler core sections are replaceable
Components (3)	Functional in ambient temperature of up to 52? C (125? F)
Components (4)	Automatic variable speed fan control

Width cab end*	13.7 ft 4.18 m
Width non-cab end	11.7 ft 3.57 m
Height mast up	54.3 ft 16.54 m
Body Length	31 ft 9.44 m
Length mast down	57.5 ft 17.54 m
Height mast down	11.75 ft 3.58 m
Mast only length	52.1 ft 15.89 m
Note	*Contact the factory for width with platform access to cab or service platform walkway.

Components (1)

Drill pipe thread greaser with remote fill tank that also accommodates disposable grease bucket

9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 5	6 in 152 mm
9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 4	5.5 in 140 mm

High Volume Water Injection - Maximum - Tank Above Deck - Capacity	200 gal (US) 757 l
Water Injection - Tank Mounted Below Front Deck - Components	Water flow meter, volume control, tank fill level indicator
High Volume Water Injection - Maximum - Tank Below Deck - Capacity	200 gal (US) 757 l
Water Injection - Tank Mounted Below Front Deck	200 gal (US) 757 l
High Volume Water Injection - Maximum - Tanks Total Capacity	400 gal (US) 1514 l
Water Injection plus Dust Collector (1)	76.5 cmm (2,700 cfm) dust collector; includes standard water injection
Water Injection plus Dust Collector (2)	Self-cleaning filters, dust chute clean-out door
Choices (1)	Static dust curtains, four sides boxed enclosed
Choices (2)	Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dry dust collector)
Choices (3)	Tram off spray system (option)

Feature (3)	Tier 4 Final package complete with DEF/Engine Shutdown Control Package
Feature (1)	Dual starter motors
Feature (2)	Ether starting aid

Choice (1)	Fixed access steps to the cab area
Choice (2)	Small platform to the cab includes fixed access steps
Choice (3)	Platform access to the cab with full length service access walkway includes fixed access steps and self-closing gates

Features (1)	Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
Features (2)	Slip resistant surfaces
Features (3)	Fuel tank capacity 833 L (220 gal)
Components (1)	Three leveling jacks provide leveling on a 7? bench (any orientation)
Components (2)	Heavy duty tow hooks (non-drill end)
Components (3)	Four (4) lift lugs, for use with cables or chains

Components (1)	Two (2) main pumps: 85 cc (piston with proportional electronic controls)
Components (2)	One (1) auxiliary circuit pump: 45 cc (piston, load sensing)
Components (3)	One (1) fan pump: 45 cc (piston with proportional electronic controls)
Components (4)	One (1) charge pump: 73.8 cc (gear, fixed displacement)
Components (5)	Scheduled Oil Sampling (S-O-S SM) ports

Features (1)	Pipe carousel:<br>Accepts quantity of four (4) 9.14 m (30 ft) pipes
Features (2)	Standard angle drilling package (0 to 30 degrees, in?5-degree?increments)
Features (4)	Hydraulically actuated, self-indexing pipe carousel accepts pipe diameters up to 152 mm (6.0 in)
Features (5)	Drills strings configured for bit changes above deck
Features (6)	Single cylinder pulldown/hoist system
Features (7)	Sliding deck wrench assembly
Features (8)	Configured with roller deck bushing (for low pressure/tricone drilling)
Features (9)	Two-piece deck bushing (for high pressure DTH drilling)
Features (10)	Overhead winch with cable and hook plus remote control; variable speed drive with a 1361 kg (3,000 lb) rating
Features (11)	Variable grip hydraulic break out wrench grip range 101-152 mm (4.0-6.0 in)
Features (12)	Closed circuit camera mounted in mast to view pipe carousel/top drive operation
Features (13)	Pipe positioner for angle drilling, multi-pass pipe handling
Features (14)	Manual pipe catcher: One (1) wire rope, pipe catcher, pipe positioner, optional manual bit basket

Single-Pass Depth	36 ft 11 m
Multi-Pass Depth	Down to 47.58 m (Down to 156 ft)
Pulldown - Rated Single Cylinder Pull-Down/Hoist System	Up to 15 876 kg (Up to 35,000 lb)
Hoist	Up to 11 907 kg (Up to 26,250 lb)

Components (1)	Electric controls for drilling, tramming, leveling plus auxiliary functions
Components (2)	Rotary torque control
Components (3)	Virtual rotary head travel stops
Components (4)	Pipe positioner engaged/disengaged indicator
Components (5)	Drill depth meter
Components (6)	Drill performance and display system
Components (7)	Delayed engine shut down
Components (8)	Filter indicators for hydraulic, fuel, compressor and engine
Components (9)	Jack pressure sensors
Components (10)	Data logging of machine health with warnings and fault code records with export capability
Components (11)	Dust suppression control
Components (12)	Mast lock indicator
Components (13)	ECM proportional fan speed control system
Components (14)	Tram interlock, machine stability limits
Components (15)	Tram interlock, pipe in hole
Components (16)	Tram interlock, mast up and locked or down and parked
Components (17)	Tram interlock, jacks retracted
Components (18)	Tram interlock, winch parked
Components (19)	Cab environment controls (AC, heat, fan speeds)
Components (20)	Pre wired for Terrain and Autonomous Operation

Cab Design	Falling Object Protective Structure (FOPS) certified cab includes:<br>- Rubber shock-mounts to absorb mechanical vibration<br>- Operator station design that integrates an ergonomic seat, joystick controls with full instrumentation, dual 254 mm (10 in) high-definition color screens and 12 volt power port<br>- Additional display screen for cc cameras; color, high-definition 254 mm (10 in)<br>- Power convertor 24V to 12V<br>- Radio-ready for communication and entertainment stereo<br>- Two swing out doors and Cat keyed locks<br>- Literature holder<br>- Storage area suitable for lunchbox
Cab Packages	<b>Standard configuration</b> includes a fabric seat, removable floor mat, single pane window glass and driller window guard<br><b>Premium configuration</b> includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass and driller window guard.
Seating	- Swivel seat is fully ergonomic, with tilt (5° adjustment), lumbar support, and fore/aft seat adjustment 80 mm (3.1 in)<br>- Seat locks and has two point retractable, 76 mm (3 in) seat belt
Windows	- Large windows on the front, rear and right cab side; full length drill window with guard<br>- Window shades (option)<br>- Windshield wiper with a common washer tank<br>- Manometer Pressure Gauge (option)
Lighting	- LED interior lights, backlit joysticks and keypads<br>- Flood lights for the drill perimeter; area spotlights<br>- Mast beacon and tram flashing strobe light (option)
HVAC	- Floor heating vent<br>- Filter access from deck, 500 hour service interval<br>- Defogging HVAC vents on main window
Cameras	- Three (3) CC cameras (front, right and left sides) provide 360° visibility from operators seat; camera on the mast to view pipe carousel/top drive operation

Pull-Down Capacity

Up to 15 876 kg (Up to 35,000 lb)

Choice (1)	Low pressure 8.6 bar (125 psi)
Choice (2)	High pressure 24.1 bar (350 psi)

Torque - Single Motor	6166 lb/ft 8360 N·m
Rotation Speed	0-150 rpm
Components (1)	Rotary torque control
Components (2)	Virtual rotary head travel interlocks
Components (3)	Virtual rotary head travel interlocks

Feature (1)	Approach angle of 15-degrees facilitates loading and unloading on a lowboy
Components (1)	Seven (7) emergency stop buttons
Components (2)	Hinged window guard over the full length of the front drill window
Components (3)	Conditional safety interlocks
Components (4)	Self-closing gates
Components (5)	Electric horn activated by push button in the cab
Components (6)	Automatic, audible tram alarm
Components (7)	Battery disconnect and starter switches can be locked out
Components (8)	Air hose retention devices
Components (9)	Slip resistant platform surfaces
Components (10)	Machine lifting provisions
Components (11)	FOPS Certified Operator Cab

Package (1)	Basic Package: Centralized manual lubrication for all pivot points, gravity fill for fuel and water
Package (2)	Standard Package: Automated lubrication system, fast fill for fuel and water (option)
Package (3)	Premium Package: Automated lubrication system, fast fill fuel and water, service center for lubricant drain and fill plus blowdown hose (option)

Hole Diameter	140-200 mm (5.5-7.87 in)
Engine	Cat© C18
Bit Load	Up to 16 964 kg (37,400 lb)

Components (8)	Top sub
Components (7)	Drill tool lubricator is included with selection of DTH Compressor
Components (1)	Two-piece bushing
Components (2)	Pipe positioner clamps
Components (3)	Deck wrench
Components (4)	Shock sub
Components (5)	Cross over subs
Components (6)	Pipe wiper seal

Components (7)	Drill tool lubricator (optional)
Components (1)	One-piece roller deck bushing
Components (2)	Pipe positioner clamps
Components (3)	Deck wrench
Components (4)	Bit sub
Components (5)	Top sub
Components (6)	Pipe wiper seal

Model	Cat® 336 Excavator type
Carrier Rollers	Three (3)
Triple Grousers (1)	600 mm (23.6 in); 0.89 bar (12.6 psi) ground pressure
Drawbar Pull	262 000 Nm (193,241 lbf-ft)
Components (1)	Track chain guards and guides
Lower rollers	Eight (8)
Travel Speed - High	2 mile/h 3.3 km/h
Travel Speed - Low	1.3 mile/h 2.1 km/h

Working Weight Range

40 823 - 45 359 kg (90,000 - 100,000 lb)