Skid Steer and Compact Track Loaders

Compact Track Loaders 299D3 XE Land Management

Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.

Compact Track Loaders 299D3 XE Land Management

Cat® Compact Track Loaders feature a steel embedded track and steel undercarriage components for maximum life in applications where maintenance, operator technique and underfoot conditions may not be ideally suited for a Multi Terrain Loader or Skid Steer Loader.
Units: USMetric

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Units: USMetric

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Units: USMetric

Dimensions

Length - Track on Ground 69.6 in
Overall Length - Track 89.4 in
Height - Top of Cab 83.6 in
Ground Clearance 9.6 in
Departure Angle 33°
Maximum Dump Angle 54°
Turning Radius from Center - Coupler 58.1 in
Turning Radius from Center - Machine Rear 74 in
Vehicle Width (400 mm/15.7 in tracks) 76 in
Turning Radius from Center - Bucket (racked) 91.1 in
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, triple flange front/rear idlers, and manual quick coupler.
Length - Without Bucket 125.5 in
Bucket Pin Reach - Maximum Lift 19.4 in
Clearance at Maximum Lift and Dump 94.5 in
Rack Back Angle - Maximum Height 81°
Vehicle Width (450 mm/17.7 in tracks) 78 in
Maximum Overall Height 158.7 in
Reach - Maximum Lift/Dump 33.6 in
Length - With Bucket on Ground 154.7 in
Maximum Reach - With Arms Parallel to Ground 51.9 in
Bucket Pin Height - Maximum Lift 126.3 in
Bucket Pin Height - Carry Position 7.1 in
Roll Back Angle 25°
Units: USMetric

Engine

Gross Power - SAE J1995 110 hp
Net Power - SAE 1349 106 hp
Displacement 232 in³
Bore 3.9 in
Stroke 4.7 in
Net Power 106 hp
Net Power - ISO 9249 107 hp
Engine Model Cat C3.8 DIT (turbo)
Peak Torque - 1,500 rpm - SAE J1995 276 ft·lbf
Units: USMetric

Hydraulic System

Standard Flow Mode - Loader Hydraulic Flow 23 gal/min
Standard Flow Mode - Loader Hydraulic Pressure 3335 psi
Standard Flow Mode - Hydraulic Power - Calculated 44 hp
Hydraulic Flow - XE - Hydraulic Power (calculated) 94 hp
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* 40 gal/min
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure 4061 psi
Note *When equipped with Cat 400 Series work tools.
Units: USMetric

Noise Level

Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Inside Cab* 83 dB(A)
Outside Cab** 104 dB(A)
Note (1) Sealed and pressurized cab is standard in North America and Europe.
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Units: USMetric

Operating Specifications

Rated Operating Capacities - 35% Tipping Load 4340 lb
Tipping Load 12400 lb
Breakout Force - Tilt Cylinder 7270 lb
Breakout Force - Lift Cylinder 6162 lb
Ground Pressure - With 450 mm/17.7 in Track 5.2 psi
Rated Operating Capacities - 50% Tipping Load 6200 lb
Ground Contact Area - With 400 mm/15.7 in Track 2171 in²
Ground Contact Area - With 450 mm/17.7 in Track 2443 in²
Ground Pressure - With 400 mm/15.7 in Track 5.9 psi
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, triple flange front/rear idlers, and manual quick coupler.
Units: USMetric

Power Train

Travel Speed - Forward or Reverse - Two Speed 8.3 mile/h
Travel Speed - Forward or Reverse - One Speed 5.5 mile/h
Units: USMetric

Service Refill Capacities

Cooling System 4.1 gal (US)
Engine Crankcase 3.5 gal (US)
Fuel Tank 58 gal (US)
Hydraulic System 14.5 gal (US)
Hydraulic Tank 10.3 gal (US)
Diesel Exhaust Fluid (DEF) Tank 5 gal (US)
Units: USMetric

Weights

Operating Weight 12764 lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, triple flange front/rear idlers, and manual quick coupler.
Extend Your Working Time
The 299D3 XE Land Management machine comes standard with two large capacity external fuel tanks (220 L /58 gal - total). These large tanks will help increase your working time by fueling up less.
Powerful Hydraulics
The XE hydraulic system provides high flow and high pressure that delivers industry leading hydraulic horsepower to efficiently run even the most power hungry work tools.
Protective Guarding and Sealing
Factory-equipped guarding and sealing components to provide additional protection for areas that could be exposed to damage and to help reduce debris entry.
Maximum Performance
High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.
Quiet and Comfortable
The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.
ELECTRICAL
12 volt Electrical System
OPERATOR ENVIRONMENT
Gauges: Fuel Level, DEF Level, Hour Meter
POWER TRAIN
Cat C3.8, Turbo Diesel Engine, Meeting U.S. EPA Tier 4 Final and EU Stage V Emission Standards
OTHER
Engine Enclosure, Lockable
MANDATORY EQUIPMENT
Quick Coupler, Mechanical or Powered
 

Find out more

For more information or to request a quote, please complete the form below.

 
Loading animation


Call us today for more information:



Find My Local Branch


©2025 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies   Accessibility   Supplier Code of Conduct