950 GC

Request a Quote (416) 667-5511

Product Brochures

Product Brochure #1

Product Brochure #2

Product Brochure #3

Product Brochure #4

Specifications

Buckets

Bucket Capacities

2.9-4.4 m³ (3.75-5.75 yd³)

Dimensions

Rack Back - Ground

40 degrees
Height - Top of Exhaust Pipe

11.17 ft 3416 mm
Centerline of Rear Axle to Hitch

5.42 ft 1650 mm
Lift Arm Clearance

12 ft 3649 mm
B-Pin Height

13.75 ft 4188 mm
Centerline of Rear Axle to Edge of Counterweight

6.75 ft 2055 mm
Ground Clearance

1.5 ft 460 mm
Rack Back - Maximum Lift

60 degrees
Height - Top of Hood

8.75 ft 2673 mm
Wheel Base

10.83 ft 3300 mm
Height - Top of ROPS

11.33 ft 3458 mm
Rack Back - Carry

45 degrees
Note

All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.

Engine

Net Power - ISO 9249

225 hp 168 kW
Emissions

Tier 4/Stage V
Displacement

428 in³ 7.01 l
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric

228 hp 168 kW
Maximum Power - 1,700 rpm - ISO 14396

240 hp 179 kW
Maximum Power - 1,700 rpm - ISO 14396 - Metric

243 hp 179 kW
Peak Gross Torque - 1,400 rpm - SAE J1995

811 ft·lbf 1099 N·m
Peak Gross Torque - 1,400 rpm - ISO 14396

805 ft·lbf 1092 N·m
Engine Model

Cat C7.1
Maximum Net Power - 1,700 rpm - ISO 9249

225 hp 168 kW
Maximum Net Power - 1,700 rpm - SAE J1349

225 hp 168 kW
Maximum Power - 1,700 rpm - SAE J1995

241 hp 180 kW
Note

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).
Bore

4.13 in 105 mm
Stroke

5.31 in 135 mm

Engine - Tier 4 Final/Stage IV

Emissions

Tier 4/Stage IV

Hydraulic System

Hydraulic Cycle Time - Total Cycle Time

9.4 s 9.4 s
Steering System - Pump Type

Piston
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)

4047 psi 27900 kPa
Implement System - Maximum Pump Output at 2,390 rpm

68 gal/min 256 l/min

Service Refill Capacities

DEF Tank

4.2 gal (US) 16 l
Transmission

11.9 gal (US) 45 l
Fuel Tank Size

76.6 gal (US) 290 l
Cooling System

13.2 gal (US) 50 l
Differential - Final Drives - Rear

10 gal (US) 38 l
Differential - Final Drives - Front

10.6 gal (US) 40 l
Crankcase

4.8 gal (US) 18 l
Hydraulic Tank

29.6 gal (US) 112 l

Sound

With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)

73 dB(A) 73 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)

109 dB(A) 109 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)

76 dB(A)*
Note (1)

*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value: Note (2)

European Union Directive "2000/14/EC" as amended by "2005/88/EC."
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**

73 dB(A) 73 dB(A)
With Cooling Fan Speed at 70% of Maximum Value: Note (1)

For machines in European Union countries and in countries that adopt the EU Directives
With Cooling Fan Speed at Maximum Value - Note

Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**

107 LWA***
Note (3)

***European Union Directive "2000/14/EC" as amended by "2005/88/EC."
Note (2)

**For machines in European Union countries and in countries that adopt the "EU Directives."

Transmission

Reverse - 3

14.2 mile/h 22.8 km/h
Forward - 3

14.2 mile/h 22.8 km/h
Forward - 1

4.5 mile/h 7.3 km/h
Forward - 2

8 mile/h 12.8 km/h
Forward - 4

22.4 mile/h 36 km/h
Reverse - 2

8 mile/h 12.8 km/h
Reverse - 1

4.5 mile/h 7.3 km/h
Note

Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.

Weights

Operating Weight

41554 lb 18849 kg

Weights and Operating Specifications

Note (2)

*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Tipping Load - Full Turn - Rigid Tires**

25875 lb 11737 kg
Breakout Force

34638 lbf 154 kN
Tipping Load - Full Turn - ISO 14397-1*

24264 lb 11006 kg
Note (3)

**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.
Operating Weight

41554 lb 18849 kg
Note (1)

For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound suppression.

Benefits

RELIABILITY YOU CAN COUNT ON

Cat® C7.1 engine offers increased power density with a combination of proven electronic, fuel, and air systems.
Equipped with automatic Cat regeneration system, Cat Clean Emissions Module (CEM) with Diesel Particulate Filter (DPF), and Diesel Exhaust Fluid (DEF) tank and pump.
Thorough component design and machine validation processes result in unmatched reliability and uptime.

ACHIEVE GREATER PRODUCTIVITY

The proven Cat Z-bar linkage geometry with Performance Series Buckets offer excellent penetration into the pile and high breakout forces. Combined with best-in-class standard dump clearan ce, this results in low fuel consumption and exceptional production capabilities.
Cat designed, electronically controlled, automatic powershiftcountershaft transmission features shift protection and is equipped with a split flow oil system for efficiency, durability, and smoother gear changes.
Optional Fusion™ quick-coupler control features a selectable kickout to adjust for efficient bucket and fork applications.

DO MORE WITH LESS FUEL

Engine Idle Management System (EIMS) and Auto Engine Idle Shutdown (EIS) maximize fuel efficiency by reducing engine rpm after a specified amount of idle time.
Electronically controlled, hydraulically driven variable speed fan adjusts to meet the varying cooling requirements of the machine. This results in a reduced average fan speed, lowering fuel consumption, noise levels, and radiator plugging.
Load sensing hydraulics produce flow and pressure for theimplement system upon demand and only in amounts necessary to perform the needed work functions. This state-of-the-art system results in low fuel consumption.

DESIGNED FOR OPERATORS

The spacious cab features easy, intuitive controls and excellent visibility which provides a comfortable working environment for efficient all day operation.
Pilot-operated hydraulic implement controls deliver comfortable, low-effort operation. Two single-axis levers or one joystick are available. Both arrangements are equipped with kick-down switches.
The adjustable steering column includes the F-N-R shifter and turn signal control lever.
Unmatched viewing area with a wide, flat, and distortion-free front windshield.
The glass stretches to the floor of the cab for excellent visibility to the bucket and front tires.
The cab roof has channels which direct rain off the corners of the cab, keeping windows clear.
Air conditioning system is standard. Ten louvered vents allow the operator to direct the air flow to remain productive and efficient all shift long.

SAFELY HOME EVERY DAY

Ladders are standard on both sides of the machine to easily access the platforms.
Platforms are equipped with guard- and handrails for safe access to the cab.
The main cab door opens to the front and provides wide access to the operator environment.
Front and back wipers ensure that a clear view is maintained.
External rearview mirrors with integrated spot mirrors arestandard.
A rear vision camera is standard to clearly monitor movement behind the machine.
Hinged wheel guards, easy removal/re-install.
Optional windshield and power train guards.

SAVE ON SERVICE AND MAINTENANCE

Grouped service points and sight gauges allow for easy daily maintenance.
Convenient access to left, right, and rear of engine compartment provides excellent serviceability.
Electrical and hydraulic service centers, along with additional key serviceability features, help make servicing and in-field component exchange quick, easy, and efficient.
A rear swing-up grill gives easy cleaning access to thecooling cores.
Optional integrated Cat Autolube system provides full lube system monitoring and diagnostic test visibility. One-button control, including fault flash function.
Caterpillar design and manufacturing techniques assureoutstanding service life.

CAT PRODUCTION MEASURMENT KIT

This optional kit is simple to install compared to other 3rd party payload systems*.
On-the-go weighing** for precise load targets with provenaccuracy, flexible installation, and easy calibration and setup.
Brings payload weighing to the cab so operators can work more productively and deliver consistently accurate loads.
Increases productivity, weighing while lifting with no interruptions in loading cycle.
High efficiency: load to exact specification, load more trucks faster, and move more material for more revenue.
Improve efficiency with less rework; save time, labor, fuel,and costs.

* Not available in all markets
** Not legal for trade

Equipment Info